Vortex Optics Crossfire Red Dot Sight Gen II - 2 MOA Dot , Black
Vortex Optics Crossfire Red Dot Sight Gen II - 2 MOA Dot , Black, The updated Crossfire is a no-nonsense sight for near any application and needs a simple point of aim and none of the frills the Crossfire should be at the top of your list br br With up to a 50 000 hour battery life and night-vision compatibility at the lowest two settings the sight will keep working in a variety of conditions The low and skeletonized lower 1 3 co-witness mounts provide vesatility for this lightweight optic br br The 2 MOA dot is quick to acquire in close-quarters while remaining fine enough to promote pin-point accuracy at extended range 11 illumination settings allows shooters to change the dot intensity to the situation at hand br br Increased light transmission with multiple anti-reflective coatings on all air-to-glass surfaces Unlimited eye relief for rapid transitions br br Highly durable hard-coat anodization provides a low-glare matte surface and helps camouflage position O-ring seals prevent moisture dust and debris from penetrating for reliable waterproof performance br br When you need a simple point of aim and none of the frills the Crossfire should be at the top of your list The 2 MOA dot is quick to acquire in close-quarters scenarios while remaining fine enough to promote pin-point accuracy at extended range In addition to looking awesome the included skeletonized lower 1 3 co-witness mount provides a rock-solid and extremely lightweight platform for your red dot The Crossfire is a no-nonsense sight for near any application br br 2 MOA Dot Reticle br br The daylight bright red dot is easy to see regardless of lighting conditions or background br br The key thing to remember with the Crossfire Red Dot is to keep both of your eyes open Keeping both eyes open allows you to take full advantage of your peripheral vision Eye placement is not critical br br Windage and Elevation Adjustments br br The Crossfire Red Dot incorporates elevation and windage dials with audible clicks Each small click will move the point-of-impact one Minute of Angle 1 MOA will closely correspond to one inch at 100 yards 1 2 inch at 50 yards 1 4 inch at 25 yards etc br br Remove the turret cap and use the raised bar on the cover or a coin to turn the adjustment dial Move the dials in the direction you wish the point-of-impact to change Turning the elevation turret counter-clockwise will raise the elevation Turning the windage turret clockwise will move the point of impact to the left br br Mounting the Crossfire Red Dot br br The Crossfire Red Dot can be mounted on a variety of platforms using the high mount or low mount br br Attach the unit to the rail base with the illumination dial positioned on the right side br br Make sure the mount is solidly seated in the base groove Position the Red Dot so you have at least four inches of eye relief br br Be sure the base clamp is hooked around the outside of the rail base br br Press the Red Dot downward and forward Then firmly tighten the base clamp bolt using the hex wrench br br When you need a simple point of aim and none of the frills the Crossfire should be at the top of your list The 2 MOA dot is quick to acquire in close-quarters scenarios while remaining fine enough to promote pin-point accuracy at extended range In addition to looking awesome the included skeletonized lower 1 3 co-witness mount provides a rock-solid and extremely lightweight platform for your red dot The Crossfire is a no-nonsense sight for near any application