Mercury 8M0081917 4-Stroke EFI Oil Change Kit 75/90/115 hp
Mercury 8M0081917 4-Stroke EFI Oil Change Kit 75/90/115 hp, Mercury 8M0081917 4-Stroke EFI Oil Change Kit 75/90/115 hpIf you routinely change the oil in your ride, using the Mercury oil change kit to change your boat's engine oil will be a snap. Mercury oil change kits contain industry-leading Mercury 25W-40 Marine Engine Oil. Over five years of engineering and development went into the exclusive Flagship Protection formula, which features a high-tech, advanced set of anti-wear additives that provide up to 33% better camshaft wear protection and the highest levels of corrosion and oxidation protection. Designed to maintain engine reliability and performance, Mercury 25W-40 Marine Engine Oil has been proven to hold its viscosity ratings longer in industry wear testing than other oils on the market. Mercury Oil, combined with a genuine Mercury Oil Filter, team up to provide the #1 protection on the water. The Mercury oil change kit is simple for most DIYers to use or have the oil change performed by a marine technician.Industry Leading Strength - The Mercury 4 stroke oil change kit ensures the longest lasting, strongest engine protection.Flagship Corrosion Resistance - New advanced corrosion inhibitors outperform competition and all industry standards. Provides protection against rust and corrosion in wet environments and during off-season storageUltimate Wear Protection - Using new, high-tech additive technology, Mercury has 33% greater camshaft wear protection compared to other marine dealers.Each Mercury 4 stroke oil change kit contains all the items needed to change oil in select Mercury 75/90/115 HP 4-Stroke Outboards - s/n 1B366823-2B094995 (5) Liters of Mercury 25W-40 Marine Engine Oil (92-8M0078627); (1) Oil Filter 35-877761K01; (1) Seal 27-828816; Complete instructions printed right on the box; Check engine oil and replace the oil filter every 100 hours of use, or annually (whichever comes first).Mercury Oil Change Instructions for 4-Stroke 75/90/115 HP EFIOil Change Procedure using the Mercury 4 stroke oil change kit Tilt the outboard up to the trailer position.; Turn the steering on the outboard so that the drain hole is facing downward. Remove the drain plug with an 18mm wrench and drain the engine oil into an appropriate container.; Place a new seal on the drain plug and lubricate with oil.; Reinstall; Changing the Oil Filter Place a rag or towel below the oil filter to absorb any spilled oil.; Unscrew the old filter by turning the filter counterclockwise.; Clean the mounting base. Apply a film of clean oil to the filter gasket. Do not grease.; Screw the new filter on until the gasket contacts the base, then tighten 3/4 turn.; Oil Filling Remove the oil cap and add oil to the midpoint of the operating range (midpoint of the cross hatched region). Adding 5 liters will bring the oil level to the midpoint of the cross hatched region.; Reinstall the oil fill cap.; Idle the engine for five minutes and check for leaks. Stop the engine and check the oil level on the dipstick.; Add oil if necessary.;