Jabsco 37202 Shower & Bilge Pump 12v
Jabsco 37202 Shower & Bilge Pump 12v, Jabsco Shower Drain and Bilge PumpFlow rate: Nominal 13 Litres/min (3 USgallons/min) Self-priming from dry up to 2m (6ft) Flow Rate: 3 GPM, Port Size: 3/4"; Nominal Voltage: 12 Volt DC, Max. Current Draw: 8 Amps, Fuse: 10 Amp; Ignition Protected, Supplied with Pumpgard StrainerQuiet running and fully corrosion resistant.; Supplied with pumpgard filter.; Permanent magnet motor; Self-priming; Compact and simple design; Dry running capability; Permanent magnet type motor; Meets ISO 8846 MARINE ignition protection; Installation Instructions: Fit pump in a dry position, as close as possible to the liquid being pumped, where there is full access to the pump for service. ; Use 3/4" i.d. spiral reinforced hose (with a smooth internal bore), or semi-rigid pipework systems. ; Note: Pipe runs should be as straight and as short as possible, avoiding riding and dipping over obstructions.; Fit pumpguard on inlet side of pump.; All marine pumps discharging overboard must be installed with the overboard discharge well above both static and heeled waterlines (Sailboats normally discharge through the transom).; Motor cases may get hot. Prolonged contact during operation may cause burns.; Note: Do not use for pumping petrol, petroleum products, or fluids with flash points below 98.6 degrees Fahrenheit.;